spedizione_7
Jul 29 - BICEP on its shipping cradle
spedizione_8
Jul 29 - a crate containing the boot?
spedizione_9
Jul 29 - BICEP (main mount) and second pallet
spedizione_10
Jul 29 - BICEP is well wrapped for the trip
spedizione_11
Jul 29 - second pallet appears to hold the upper El frame and 1/2 of the boot frame
IMG_1616
Jul 23 - telescope horizontal for shipping
IMG_1613
Jul 23 - to lift and bring vertical, a second hoist is required
IMG_1610
Jul 23 - telescope swings vertical as chain-fall hoist is played out
IMG_1577
Jul 22 - full assembly, rear
IMG_1585
Jul 22 - elevation sector drive detail
IMG_1586
Jul 22 - full assembly, front
IMG_1587
Jul 22 - az drive detail
IMG_1590
Jul 22 - full assembly, side, el=50
IMG_1591
Jul 22 - theta drive/belt detail
foto_1
Jul 19 - az encoder and theta encoder spiders, w/ limit switches installed
foto_2
Jul 19 - partial assembly: stationary, az, lower el frames
foto_3
Jul 19 - note el sector drive--range is min el=15?
P1010003
Jul 9 - boot extended
P1010004
Jul 9 - theta bearing/frame w/ 6 of 10 cryostat frame support posts
P1010005
Jul 9 - middle and lower elevation frame
P1010006
Jul 9 - az frame (yoke) on stationary frame (pedestal)
foto_4
May 31 - az frame (yoke)
foto_5
May 31 - theta frame
foto_6
May 31 - el frame
foto_7
May 31 - stationary frame